Download Drivers

Hi everyone,

I've been trying to find a driver download for the Zebra Rz400 printer, but unfortunately, my search attempts have been unsuccessful so far. I've already visited the official Zebra website and searched through their support section, but couldn't find a specific driver for this model. I've also checked some popular driver download websites, but they only seem to have outdated or generic drivers that are not compatible with my printer.

If anyone here has the driver link or knows where I can find a reliable source to download the Zebra Rz400 driver, I would greatly appreciate your help. I need the driver to ensure smooth operation and compatibility with my current system. Thanks in advance for any assistance you can provide!

Below you can download zebra rz400 driver for Windows.

File name: zebra-rz400.exe
Version: 4.730
File size: 17.83 MB
Upload source: manufactuter website
Antivirus software passed: Norton ver 2.46

Zebra Rz400 Driver Download

(click above to download)


Device Specification:

- Device Type: Zebra Rz400
- Connectivity: Wired (Ethernet, USB)
- Print Method: Direct Thermal/Thermal Transfer
- Maximum Print Speed: 10 inches per second
- Maximum Print Width: 4.09 inches
- Interface: RS-232 Serial, Parallel, USB 1.1, Ethernet
- Resolution: 203 dpi (dots per inch)
- Memory: 16 MB RAM, 8 MB Flash
- Supported Barcodes: Code 11, Code 39, Code 93, Code 128, EAN-8, EAN-13, UPC-A, UPC-E, MSI, Plessey, POSTNET, PLANET, RSS-14, etc.
- Printer Language: ZPL, ZPL II
- Power Source: Universal Power Supply (110-240V AC)
- Dimensions: 10.9" x 13.5" x 19.5" (H x W x D)
- Weight: 32 lbs

Troubleshooting Questions and Answers:

1. Q: Why is my Zebra Rz400 not powering on?
A: First, ensure that the power cable is securely connected to both the printer and the power source. Check if the power outlet is functional by testing it with another device. If the issue persists, consult the device's user manual for any specific troubleshooting steps or contact Zebra technical support for further assistance.

2. Q: Why is my Zebra Rz400 not connecting to the computer?
A: Confirm that the printer's USB or Ethernet cable is properly connected to both the printer and the computer. Ensure that the computer's USB or Ethernet port is functioning correctly. If using Ethernet, make sure the printer and the computer are on the same network. Additionally, ensure that the correct printer driver is installed on the computer. If problems persist, consult the device's user manual or contact Zebra technical support for guidance.

3. Q: Why is my Zebra Rz400 not printing the complete label?
A: Verify that the label roll is loaded correctly and has sufficient remaining labels. Ensure that the label width and length settings in the printer's software or control panel match the actual label dimensions. Check if the print head is clean and free from debris or contaminants. If the issue persists, recalibrate the printer or adjust the label positioning settings. Consult the device's user manual or contact Zebra technical support for

Thank you so much for sharing the link to the working Windows driver for the Zebra RZ400, it's much appreciated!