Below you can download of hp laserjet p1102 driver for Windows.
File name: of-hp-laserjet-p1102.exe
Version: 3.400
File size: 43466 MB
Upload source: other website
Antivirus software passed: Norton v 3.69
Download Driver Of Hp Laserjet P1102(click above to download)
Specification:
- Device: HP LaserJet P1102
- Printing technology: Laser
- Print speed: Up to 19 ppm (pages per minute)
- Print resolution: Up to 600 x 600 dpi (dots per inch)
- Connectivity: USB 2.0
- Paper handling: 150-sheet input tray, 100-sheet output tray
- Supported media types: Paper (laser, plain, photo, rough), envelopes, labels, cardstock, transparencies
- Supported media sizes: A4, A5, A6, B5, postcards, envelopes (C5, DL, B5)
- Compatible operating systems: Windows, Mac, Linux
Troubleshooting Questions and Answers:
1. Q: The printer is not responding when I try to print. What could be the issue?
A: There could be several reasons for this problem. Please try the following steps to troubleshoot:
- Ensure the printer is properly connected to the computer via USB cable.
- Check if the printer is powered on and there are no error lights on the control panel.
- Make sure the printer driver is installed correctly on your computer.
- Restart both the computer and the printer.
2. Q: The printed documents have streaks or smudges. How can I fix this issue?
A: If you are experiencing streaks or smudges on printed documents, please consider the following troubleshooting steps:
- Check the toner level and replace it if necessary.
- Clean the printer's paper path, including the pickup roller and transfer roller.
- Use high-quality paper designed for laser printers.
- Adjust the print density settings in the printer driver to a higher value if needed.
3. Q: The printer is showing a "Paper Jam" error message. What should I do?
A: If the printer displays a "Paper Jam" error message, follow these steps to resolve the issue:
- Turn off the printer and disconnect the power cord.
- Gently remove any stuck paper from the input and output trays.
- Open the printer's rear access door (if applicable) and remove any jammed paper from there.
- Close all paper trays and doors securely.
- Plug in the power cord and turn on the printer. It should now be ready for use.