Below you can download hp laserjet p1102 windows 10 64 bit gezginler driver for Windows.
File name: hp-laserjet-p1102_win1064-bit-gezginler.exe
Version: 3.859
File size: 18.62 MB
Upload source: original install disk
Antivirus software passed: McAfee ver. 4.11
Hp Laserjet P1102 Driver Windows 10 64 Bit Gezginler(click above to download)
Device Specification:
- Model: Hp Laserjet P1102
- Operating System: Windows 10 64 Bit
- Driver Source: Gezginler website
Troubleshooting Questions and Answers:
1. Q: Why is my Hp Laserjet P1102 not printing?
A: There could be several reasons for this issue. First, make sure the printer is connected properly to the computer and turned on. Check if there are any error messages or paper jam. Also, ensure that the printer has enough ink or toner. Restarting the printer and updating the driver might also resolve the problem.
2. Q: How can I fix paper jams in my Hp Laserjet P1102?
A: Paper jams can occur due to various reasons. To resolve this issue, turn off the printer and carefully remove the jammed paper. Make sure there are no torn pieces left inside. Check the paper tray for any misaligned or overloaded paper. Adjust the paper guide to fit the paper size properly. Avoid using wrinkled or damaged paper as it can cause jams.
3. Q: Why is my Hp Laserjet P1102 printing faded or blurry documents?
A: Faded or blurry prints could be a result of low ink or toner levels. Check the ink/toner cartridges and replace them if needed. Also, ensure that the print density settings are correctly configured. Clean the printhead or cartridges to remove any accumulated dirt or debris. If the problem persists, it might be necessary to align the printhead or perform a calibration.