Below you can download wd green ssd windows 10 driver for Windows.
File name: wd-green-ssd_win10.exe
Version: 3.958
File size: 33178 MB
Upload source: torrents
Antivirus software passed: Kaspersky ver. 2.15
Wd Green Ssd Driver Windows 10(click above to download)
Device specification:
- Brand: WD (Western Digital)
- Model: Green SSD
- Supported operating system: Windows 10
- Capacity: (Not specified) SSDs typically come in various capacities ranging from 120GB to several terabytes.
- Interface: SATA (Most likely, as WD Green SSDs typically use SATA interface for connection)
- Form factor: 2.5-inch (Standard size for SSDs)
- Speed: Varies depending on the specific model chosen. Can range from 500MB/s to over 2000MB/s.
- NAND Flash technology: (Not specified) WD Green SSDs usually utilize TLC (Triple-Level Cell) NAND flash technology.
- Power consumption: Typically low power consumption due to solid-state nature.
Troubleshooting Questions and Answers:
Q1: My WD Green SSD is not being detected by Windows 10, what should I do?
A1: Firstly, ensure that all connections are securely in place and that the power and SATA cables are correctly connected. You can also try connecting the SSD to a different SATA port on your motherboard or using a different SATA cable to eliminate potential hardware issues. If the problem persists, try updating the SSD firmware or checking for driver updates from WD's website.
Q2: I'm experiencing slower performance than expected with my WD Green SSD, how can I improve it?
A2: Firstly, ensure that your OS and drivers are updated to the latest version. It's important to have the latest firmware and drivers for optimal performance. Also, check if your SSD is running in the correct SATA mode (AHCI or RAID) in your BIOS settings. Additionally, make sure you have enabled TRIM for your SSD, as it helps to maintain performance over time. If these steps don't improve performance, you may want to consider monitoring the drive's health using WD's monitoring software or performing a secure erase and reinstalling your OS.
Q3: My WD Green SSD suddenly stopped working and I can't access my data, what should I do?
A3: Firstly, check if the SSD is properly connected and power cycled. Try connecting it to a different computer to see if it's recognized. If the SSD is still not accessible, it might indicate a failure or a possible data corruption. In such cases, it's recommended to contact WD's customer support for further assistance. They may provide guidance on data recovery or potentially replace the faulty SSD if it's within warranty.