Below you can download zebra zm400 windows 10 64 bit driver for Windows.
File name: zebra-zm400_win1064-bit.exe
Version: 7.480
File size: 44417 MB
Upload source: original install disk
Antivirus software passed: Symantec v 1.64
Zebra Zm400 Driver Windows 10 64 Bit(click above to download)
Forum Post Title: Zebra ZM400 Driver Compatibility with Windows 10 64 Bit - Specifications and Troubleshooting
---------------------------------------------------------------------------------------------------------------------
Device Specifications:
- Device: Zebra ZM400
- Compatibility: Windows 10 (64 Bit)
- Driver Required: Yes
- Model: ZM400
- Connectivity: USB, Serial, Ethernet
- Print Technology: Thermal Transfer, Direct Thermal
- Print Resolution: 203 dpi (8 dots/mm), 300 dpi (12 dots/mm)
- Print Speed: Up to 10 inches per second
- Maximum Print Width: 4.09 inches (104 mm)
- Maximum Print Length: 39 inches (990 mm)
Troubleshooting Questions and Answers:
Q1: Why is my Zebra ZM400 not recognized by Windows 10?
A1: Ensure you have the correct driver installed for Windows 10 64 bit. Download and install the latest Zebra ZM400 driver from the official Zebra website. Additionally, check the USB/Serial/Ethernet cable connections and try using a different USB port or cable.
Q2: How can I resolve print quality issues with my Zebra ZM400?
A2: To address print quality problems, first, make sure you are using the correct media type and label size for your application. Ensure the print head is clean and free from debris. Adjust the print speed and darkness settings to optimize print quality. If the issue persists, try updating the printer firmware or consult the Zebra support portal for further assistance.
Q3: Why is my Zebra ZM400 printer not feeding labels correctly?
A3: To troubleshoot label feeding issues, check the label roll and make sure it is loaded correctly and not jammed. Ensure the label width, length, and gap settings in the printer configuration match the actual label dimensions. Verify that the label sensors are clean and unobstructed. If the problem continues, inspect the printer's label path for any obstructions or worn-out parts that may require replacement.
---------------------------------------------------------------------------------------------------------------------
Note: The provided specifications and troubleshooting questions/answers are based on general information about the Zebra ZM400 printer and may vary depending on the specific model and configuration. For accurate information, please refer to the manufacturer's documentation and support resources.