Below you can download elm327 v1.5a windows 10 driver for Windows.
File name: elm327-v15a_win10.exe
Version: 9.914
File size: 20546 MB
Upload source: manufactuter website
Antivirus software passed: Symantec version 3.76
Elm327 V1.5A Driver Windows 10(click above to download)
The Elm327 V1.5A is a driver compatible with Windows 10 operating system. This device allows for the communication between a vehicle's on-board diagnostic (OBD) system and a computer through a standard OBD-II port. It is primarily used for diagnostic purposes and vehicle performance analysis.
Specification:
- Compatibility: Windows 10
- Version: Elm327 V1.5A
- Function: OBD-II communication
- Connection: Standard OBD-II port
Troubleshooting Questions and Answers:
Q1: Why is the Elm327 V1.5A not connecting to the OBD-II port?
A1: Ensure that the OBD-II cable is securely connected to both the device and the vehicle's OBD-II port. Also, check if the OBD-II port is properly functioning by testing with another OBD-II device if available.
Q2: Why is the Elm327 V1.5A not being recognized by Windows 10?
A2: Verify that the driver for Elm327 V1.5A is installed correctly on your Windows 10 computer. If not, download the latest compatible driver from the manufacturer's website and install it. Additionally, ensure that the device is properly plugged into a USB port on your computer.
Q3: Why is the Elm327 V1.5A not providing any vehicle data when connected?
A3: Confirm that the OBD-II port pins are clean and not corroded, as this may interfere with the device's ability to communicate with the vehicle's on-board computer. Also, check if the vehicle ignition is turned on and the engine is running, as the device needs power from the vehicle to operate properly.