Below you can download hp p1102 windows 10 driver for Windows.
File name: hp-p1102_win10.exe
Version: 4.930
File size: 19.26 MB
Upload source: original install disk
Antivirus software passed: Avira ver 3.45
Driver Hp P1102 Windows 10(click above to download)
Specification:
- Model: HP P1102
- Compatibility: Windows 10
- Driver: Installed HP P1102 driver for Windows 10
- Connectivity: USB 2.0
- Print Speed: Up to 19 ppm (pages per minute)
- Print Resolution: Up to 600 x 600 dpi (dots per inch)
- Paper Handling: 150-sheet input tray, 100-sheet output bin
- Print Size: A4, A5, A6, B5, postcards, envelopes
- Duplex Printing: Manual
- Power Consumption: 365 watts (printing), 2.2 watts (standby)
- Dimensions (W x D x H): 349 x 410 x 228 mm
- Weight: 5.3 kg
Troubleshooting Questions and Answers:
1. Question: Why is my HP P1102 not printing anything?
Answer: There could be multiple reasons for this issue. Check if the printer is turned on and connected properly to the computer. Ensure that the printer has enough paper and ink/toner. Also, verify if the correct printer driver is installed and try restarting both the printer and the computer.
2. Question: How do I fix paper jams in my HP P1102?
Answer: Paper jams can occur if the paper is not loaded correctly or if it is damaged. Firstly, turn off the printer and carefully remove any jammed paper. Make sure there are no torn pieces of paper left inside. Reload the paper tray with the correct paper size and ensure it is aligned properly. Finally, turn on the printer and try printing again.
3. Question: Why is my HP P1102 printing faded or blurry documents?
Answer: Faded or blurry prints may indicate low ink/toner levels. Check the ink/toner levels and replace/refill if necessary. Additionally, ensure that the print quality settings are appropriately adjusted for the type of document being printed. Clean the printer heads or run a printer maintenance routine to improve print quality.