Below you can download gigabyte a320m-s2h driver for Windows.
File name: gigabyte-a320m-s2h.exe
Version: 5.389
File size: 17.14 MB
Upload source: manufactuter website
Antivirus software passed: Kaspersky ver. 4.22
Download Driver Gigabyte A320M-S2H(click above to download)
Specifications of Device: Gigabyte A320M-S2H
- Socket Type: AM4
- Chipset: AMD A320
- Form Factor: Micro ATX
- Memory Type: DDR4
- Maximum Memory Supported: 32 GB
- Expansion Slots: 1 x PCIe 3.0 x16, 2 x PCIe 2.0 x1
- Storage Interfaces: 4 x SATA 6Gb/s
- USB Ports: 8 x USB 2.0, 4 x USB 3.1 Gen 1
- Video Ports: 1 x D-Sub, 1 x HDMI
- LAN Port: Realtek GbE LAN
- Audio: Realtek ALC887
Troubleshooting Questions and Answers:
Question 1: Why is my device not turning on after installation?
Answer 1: Check if the power cables are properly connected to the motherboard and ensure the PSU switch is turned on. Verify that the RAM and CPU are correctly seated, and the GPU (if applicable) is firmly attached.
Question 2: How do I resolve a boot loop issue on the Gigabyte A320M-S2H?
Answer 2: Firstly, disconnect all unnecessary peripherals and try booting the system. If the issue persists, reset the CMOS by either removing the motherboard battery or using the relevant jumper on the motherboard. Updating the BIOS to the latest version is also recommended.
Question 3: What can I do if my USB ports are not functioning?
Answer 3: Ensure that the USB drivers are installed correctly. Check the Device Manager for any exclamation marks indicating driver issues. If required, download and install the latest drivers from the official Gigabyte website. It is also advisable to test the USB ports with different devices to eliminate the possibility of a hardware fault.