Below you can download ch340g for windows 10 driver for Windows.
File name: ch340g-for_win10.exe
Version: 1.265
File size: 19633 MB
Upload source: original install disk
Antivirus software passed: McAfee 5.32
Ch340G Driver Download For Windows 10(click above to download)
Device Specification: Ch340G USB to Serial Converter
Specifications:
- Interface: USB 2.0
- Operating System Support: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP, MacOS, Linux
- Data Transfer Rate: Up to 2 Mbps
- Chipset: CH340G
- Dimensions: 30mm x 15mm x 6mm
- Weight: 2 grams
- Power: Bus-powered (no external power required)
- Supports common serial-based applications and devices
Troubleshooting Questions and Answers:
Q: Why is my Ch340G not recognized by my Windows 10 computer?
A: There are a few possible reasons for this issue. First, make sure you have installed the CH340G driver compatible with Windows 10. You can download the driver from a trusted source and install it. If the driver is already installed, try connecting the device to a different USB port or using a different USB cable. Make sure the device is properly plugged in and the LED indicator is on. If the problem persists, try restarting your computer and connecting the device again.
Q: The data transfer rate of my Ch340G is slower than expected, what can I do?
A: If you are experiencing slower data transfer rate than the device's maximum capability, there are a few things you can check. First, ensure the Ch340G is connected to a USB 2.0 port for optimal performance. Using a USB 3.0 port may cause compatibility issues. Additionally, check if there are any background processes or applications consuming significant system resources, as they could impact data transfer speed. Lastly, try using a different USB cable to rule out any cable-related issues.
Q: I am unable to establish a serial connection using my Ch340G, what should I do?
A: In case you are unable to establish a serial connection with the Ch340G, consider the following troubleshooting steps. Firstly, ensure you have selected the correct serial port in the software or application you are using. Check the Device Manager or serial communication software to verify the assigned COM port. Additionally, verify that the baud rate, parity, stop bits, and other communication settings are correctly configured for your specific application. If necessary, consult the Ch340G user manual or the documentation of the target serial device for configuration details.