Below you can download software for arduino uno driver for Windows.
File name: software-for-arduino-uno.exe
Version: 6.315
File size: 34608 MB
Upload source: torrents
Antivirus software passed: Panda version 1.43
Download Driver Software For Arduino Uno(click above to download)
Device Specifications:
- Model: Arduino Uno
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
Troubleshooting Questions and Answers:
1. Q: Why is my Arduino Uno not being recognized by my computer?
A: Ensure that you have installed the appropriate driver software for Arduino Uno on your computer. You can download the driver software from the official Arduino website.
2. Q: My Arduino Uno is not powering up, what could be the issue?
A: Firstly, verify that the input voltage applied to the Arduino Uno is within the recommended range of 7-12V. Make sure the power supply or battery is providing sufficient voltage. Additionally, check the power connection to ensure it is properly connected.
3. Q: Why are the digital I/O pins on my Arduino Uno not working correctly?
A: Make sure the pins are set to the correct mode, either input or output, using the appropriate commands in the code. Check for any loose connections or faulty wiring and ensure that the pins are not overloaded with excessive current, staying within the specified 20 mA limit per I/O pin.