Below you can download impressora zebra gc420t driver for Windows.
File name: impressora-zebra-gc420t.exe
Version: 1.967
File size: 18.79 MB
Upload source: original install disk
Antivirus software passed: Panda v 1.91
Download Driver Impressora Zebra Gc420T(click above to download)
Device Specification:
- Device Name: Zebra GC420T
- Printer Type: Thermal Transfer
- Print Method: Direct Thermal and Thermal Transfer
- Print Resolution: 203 dpi (8 dots/mm)
- Print Speed: Up to 4 inches (102 mm) per second
- Media Width: 1.00" (25.4 mm) to 4.25" (108 mm)
- Media Length: 0.38" (9.6 mm) to 39" (991 mm)
- Maximum Print Width: 4.09" (104 mm)
- Connectivity: USB, Serial, and Parallel ports
- Compatibility: Windows® 10, Windows 8.1, Windows 7, Windows Server 2016, Windows Server 2012, Windows Server 2008
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra GC420T printer not responding when connected via USB?
A: Make sure you have installed the necessary driver for the printer. If it is already installed, try using a different USB cable or connecting the device to a different USB port. Restarting the computer and printer can also help resolve any communication issues.
2. Q: The print quality of my Zebra GC420T is poor and faint. How can I fix this?
A: Firstly, check if the printer is set to a high enough print density. Adjust the print density settings in the printer driver or the printer's control panel. Make sure you are using the correct label or ribbon type for your application. Consider cleaning the print head using a lint-free cloth and isopropyl alcohol to remove any debris or buildup.
3. Q: Why is my Zebra GC420T printer not feeding the labels properly?
A: Ensure that the label roll is loaded correctly, and the media sensor is properly aligned with the labels. Adjust the media guides to avoid any misalignment. Check if the label sensor is clean and not obstructed by any dirt or debris. Additionally, check the tension on the label roll to prevent excessive resistance during feeding.