Below you can download jabra move windows 10 driver for Windows.
File name: jabra-move_win10.exe
Version: 8.429
File size: 16.82 MB
Upload source: search engine
Antivirus software passed: Kaspersky ver 3.69
Jabra Move Driver Windows 10(click above to download)
Device Specification:
- Product: Jabra Move Wireless Stereo Headphones
- Compatibility: Windows 10 (driver required)
- Connectivity: Bluetooth 4.0, 3.5mm audio cable
- Battery Life: Up to 8 hours of continuous playtime
- Frequency Response: 20Hz-20kHz
- Speaker Size: 40mm dynamic speakers
- Microphone: Omnidirectional
- Controls: Volume, play/pause, answer/end calls, track control
Troubleshooting Questions and Answers:
Q1: Why is the sound quality of my Jabra Move headphones poor?
A1: Ensure that the headphones are fully charged and within the Bluetooth range of the connected device. If using a wired connection, check if the audio cable is securely plugged into both the headphones and the audio source. Additionally, clean the ear cups and ensure they are properly positioned on your ears for optimal sound quality.
Q2: My Jabra Move headphones are not pairing with my Windows 10 computer. What should I do?
A2: First, make sure the headphones are in pairing mode by pressing and holding the Bluetooth button for 3 seconds until the LED indicator starts flashing. Then, check if Bluetooth is enabled on your Windows 10 computer and search for available devices. If the headphones still don't appear, try resetting the headphones by turning them off, then pressing and holding the Bluetooth and Volume up buttons simultaneously until the LED light flashes purple.
Q3: The microphone on my Jabra Move headphones is not working during calls. How can I fix this?
A3: Confirm that the headphones are properly connected and the microphone is not muted. Test the microphone on a different device to determine if it's a compatibility issue. If it still doesn't work, perform a factory reset by turning off the headphones, then pressing and holding the Volume up and Volume down buttons simultaneously for 10 seconds. Afterward, repair the headphones to your device and test the microphone again.