Below you can download hp laserjet 1020 printer driver for Windows.
File name: hp-laserjet1020-printer.exe
Version: 4.678
File size: 20.90 MB
Upload source: original install disk
Antivirus software passed: Norton version 3.60
Download Driver Hp Laserjet 1020 Printer(click above to download)
Device Specification:
- Brand: HP
- Model: LaserJet 1020
- Type: Laser Printer
- Printing Technology: Laser
- Print Speed: Up to 15 pages per minute
- Print Resolution: Up to 600 x 600 dpi
- Paper Handling: Standard Input Capacity of 150 sheets
- Connectivity: USB 2.0
- Compatible Operating Systems: Windows, Mac
- Dimensions: 14.6 x 9.5 x 8.2 inches
- Weight: 11.0 lbs
- Power Consumption: Max 275 Watts
Troubleshooting questions and answers:
1. Question: Why is the printer not responding when I send a print command?
Answer: Firstly, ensure that the printer is connected to a power source and turned on. Verify the USB connection between the printer and your computer. Check if there are any error messages or blinking lights on the printer. If all seems fine, try restarting both the printer and the computer. If the issue persists, uninstall and reinstall the printer driver.
2. Question: The printer is printing blank pages. What could be the reason?
Answer: Firstly, make sure that the toner cartridge has sufficient ink. Sometimes, shaking the toner cartridge gently can also resolve this issue. Check the printer settings to ensure that the page to be printed is not blank. Inspect the printer drum for any damage or dirt, clean if necessary. If the problem continues, try replacing the toner cartridge.
3. Question: The printer is displaying a "Paper Jam" error message. How do I resolve it?
Answer: Start by turning off the printer and disconnecting the power cord. Open all compartments and trays to visually inspect for any stuck or jammed paper. Gently remove any paper scraps or objects causing the jam. Make sure the paper is loaded correctly in the tray, aligned properly, and not exceeding the maximum paper load capacity. After clearing the jam, reconnect the power, turn on the printer, and try printing again.