Below you can download jiofi 2 for windows 10 driver for Windows.
File name: jiofi2-for_win10.exe
Version: 5.749
File size: 16.76 MB
Upload source: manufactuter website
Antivirus software passed: Norton ver. 2.73
Jiofi 2 Driver Download For Windows 10(click above to download)
Device Specification:
- Device Name: JioFi 2
- Compatibility: Windows 10
- Driver Download: Available for Windows 10
- Connectivity: Wi-Fi hotspot device
- Network Support: 4G LTE
- SIM Type: Micro SIM
- Maximum Support: Up to 31 devices
- Battery Capacity: 2300mAh
- Battery Backup: Up to 6-7 hours
- MicroSD Storage: Up to 32GB
- Dimensions: 85.0 mm × 55.0 mm × 16.3 mm
- Weight: 80g
Troubleshooting Questions and Answers:
1. Q: Why is my JioFi 2 not connecting to the internet?
A: Ensure that the SIM card is properly inserted and activated. Check if the device has sufficient network coverage. Restart the JioFi and try connecting again. If the issue persists, contact Jio customer support for further assistance.
2. Q: Why is my JioFi 2 battery not charging?
A: Make sure you are using the supplied charger and cable. Check if the charger is properly connected to a power source. Clean the charging port and try a different power outlet. If the battery still doesn't charge, the battery may need to be replaced. Contact Jio customer support for guidance.
3. Q: How can I change the Wi-Fi password on my JioFi 2?
A: Connect your device to the JioFi Wi-Fi network. Open a web browser and enter "http://jiofi.local.html" or "http://192.168.225.1" in the address bar. Log in with the default username and password (usually "administrator" for both). Navigate to the Wi-Fi settings section and look for the option to change the password. Enter a new password and save the settings. Reconnect your devices with the updated password.