Below you can download monitor windows 10 driver for Windows.
File name: monitor_win10.exe
Version: 8.514
File size: 12754 MB
Upload source: manufactuter website
Antivirus software passed: AVG v. 5.50
Driver Monitor Windows 10(click above to download)
This device is a flashtool driver for computers running on Windows 8.1 64-bit operating system. It is designed to facilitate the flashing (reprogramming) of firmware or software on compatible devices. The driver serves as the intermediary between the computer and the target device, allowing data to be transferred and updated.
Troubleshooting Questions and Answers:
1. Q: Why is my device not being recognized by the flashtool driver on Windows 8.1 x64?
A: Ensure that the device is properly connected to the computer via a compatible USB cable. Try using a different USB port or cable if needed. Additionally, make sure the device is powered on and in the correct mode for flashing.
2. Q: My computer shows an error message stating "Driver is not digitally signed" when installing the flashtool driver on Windows 8.1 x64. What should I do?
A: Windows 8.1 x64 requires drivers to be digitally signed for security purposes. To proceed with the installation, you need to disable driver signature enforcement temporarily. Restart your computer and press F8 repeatedly until the Advanced Boot Options menu appears. Then select "Disable driver signature enforcement" and continue with the driver installation.
3. Q: The flashtool driver installation completes successfully, but the flashing process fails to start. What could be the issue?
A: There could be multiple reasons for this problem. First, make sure that the device you are trying to flash is compatible with the specific flashtool version you are using. Second, check if the device's battery is adequately charged as insufficient power may halt the flashing process. Lastly, verify that the firmware or software file you are attempting to flash is not corrupted or incompatible with your device.