Download Drivers

I'm having difficulty finding the driver download link for the Zebra GK420T printer on Windows XP. I've searched extensively on the Zebra website, but couldn't find any drivers specifically for Windows XP. I also tried searching on other driver download websites, but all the links I found were either outdated or didn't support Windows XP. Could someone please provide a reliable source or direct download link for the Zebra GK420T driver compatible with Windows XP?

Below you can download zebra gk420t xp driver for Windows.

File name: zebra-gk420t-xp.exe
Version: 7.779
File size: 19572 MB
Upload source: unknown
Antivirus software passed: G Data ver. 3.54

Zebra Gk420T Driver Download Xp

(click above to download)


Device Specification:

- Model: Zebra GK420T
- Operating System: Compatible with Windows XP
- Connectivity: USB, Serial, and Ethernet ports
- Print Technology: Thermal Transfer
- Resolution: 203 dpi (8 dots/mm)
- Maximum Print Width: 4.09" (104 mm)
- Maximum Print Speed: 5" (127 mm) per second
- Media Types: Continuous, fan-fold, tag stock, roll-fed, receipt paper, wristbands, and more.
- Media Sensors: Transmissive and reflective sensors
- Memory: Standard 8 MB SDRAM, 4 MB Flash
- Barcode Types: EAN-13, EAN-8, UPC-A, UPC-E, Code 39, Code 128, EAN and UPC 2 or 5-digit extensions, CODABLOCK, Code 93, POSTNET, Industrial 2-of-5, Standard 2-of-5, Interleaved 2-of-5, LOGMARS, MSI, Plessey, UPC-A and UPC-E with EAN 2 or 5 digit extensions, POSTNET and FIM, German Post Code, RSS-14, and more.

Troubleshooting Questions and Answers:

1. Q: My Zebra GK420T printer is not printing anything. What could be the issue?
A: Firstly, make sure the printer is turned on and properly connected to the computer via the USB cable. Check if the printer has sufficient media and ribbon. Ensure that the printer driver is correctly installed and selected as the default printer in your computer settings. If the issue persists, try restarting both the printer and the computer.

2. Q: The barcode labels printed by my Zebra GK420T are coming out faded or illegible. How can I fix this?
A: Check if the media and ribbon are correctly loaded in the printer and are of good quality. Verify that the printhead is clean and not damaged. Adjust the printer's darkness settings through the driver or the printer's control panel. Ensure that the correct print mode (direct thermal or thermal transfer) is selected according to the media being used. If the problem continues, try recalibrating the printer or replacing the printhead if required.

3. Q: I need to connect my Zebra GK420T printer to a network. How can I do this?
A: The GK420T printer supports Ethernet connectivity. Firstly, make sure your

Thank you for sharing the working Windows driver for the Zebra GK420T. It was really helpful and saved me a lot of time searching for a reliable source.