Below you can download zebra zd220t barcode printer driver for Windows.
File name: zebra-zd220t-barcode-printer.exe
Version: 7.275
File size: 21245 MB
Upload source: manufactuter website
Antivirus software passed: AVG v. 2.7
Zebra Zd220T Barcode Printer Driver Download(click above to download)
Device Specification:
- Model: Zebra Zd220T Barcode Printer
- Printer Type: Direct thermal
- Print Method: Direct thermal
- Maximum Print Width: 4.09 inches
- Maximum Print Speed: 4 inches per second
- Resolution: 203 dpi
- Connectivity: USB, Serial, Ethernet
- Memory: 256 MB Flash, 128 MB SDRAM
- Barcode Support: 1D and 2D barcodes
- Media Type: Roll-fed or fanfold, die-cut or continuous direct thermal labels and receipts
- Media Width: 1.00" (25.4 mm) to 4.25" (108 mm)
- Media Length: 0.38" (9.6 mm) to 39.00" (990 mm)
- Dimensions: 7.5" (190 mm) H x 7.6" (194 mm) W x 10" (254 mm) D
- Weight: 2.5 lbs (1.1 kg)
Troubleshooting Questions and Answers:
1. Q: Why is the printer not printing any labels?
A: Firstly, ensure that the printer is powered on and connected to the computer properly. Check the label roll to make sure it is loaded correctly and that the media is not jammed. Verify if the printer driver is installed and selected properly. If the issue persists, try calibrating the printer using the calibration settings in the printer driver.
2. Q: The barcode looks distorted and unreadable on the printed labels. How can I fix this?
A: Check the label media to ensure it is compatible with the printer and meets the required specifications. Make sure the correct media type is selected in the printer driver settings. Adjust the darkness or power setting to achieve optimum print quality. Additionally, clean the printhead with a lint-free cloth dampened with alcohol to remove any debris or residue that may be affecting print quality.
3. Q: The printer is displaying an "Out of Paper" error, even though there is still media available. What can I do?
A: Check the label roll to ensure it is properly loaded and the media sensor is detecting it correctly. Make sure the media is not stuck or jammed inside the printer. Verify the correct media type and size is selected in the printer driver settings. If the issue persists, try resetting the printer by turning it off, unplugging it from the power