Below you can download windows 10 brother hl-2140 driver for Windows.
File name: _win10-brother-hl-2140.exe
Version: 9.712
File size: 13363 MB
Upload source: manufactuter website
Antivirus software passed: McAfee 4.45
Windows 10 Driver Brother Hl-2140(click above to download)
Device Specifications:
- Manufacturer: Brother
- Model: HL-2140
- Technology: Laser
- Print Speed: Up to 23 pages per minute (ppm)
- Print Resolution: Up to 2400 x 600 dpi
- Paper Handling: 250-sheet input tray, 100-sheet output tray
- Connectivity: USB 2.0 interface
- Compatibility: Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, Mac OS X (10.4.11 or greater)
Troubleshooting Questions and Answers:
1. Question: Why is the printer not responding when attempting to print?
Answer: There could be several reasons for this issue. Firstly, ensure that the printer is turned on and connected properly to the computer via the USB cable. Then, check if the printer driver is correctly installed on the computer. Lastly, make sure there are no error messages or paper jams on the printer display that could be preventing printing.
2. Question: The printer is producing faded or light printouts. What could be the cause?
Answer: If the printed documents appear faded or light, it may be due to low toner levels. Check the toner cartridge and replace it if necessary. Additionally, make sure the print density settings are appropriately configured in the printer driver. Adjusting the print density can improve the print quality as well.
3. Question: The printer is displaying a "Paper Jam" error message. How do I resolve this issue?
Answer: When encountering a paper jam error, follow these steps to clear it. Start by turning off the printer and disconnecting the power cord. Then, open the front cover and remove the drum and toner assembly. Carefully remove any jammed paper from the printer. Ensure there are no torn pieces of paper left inside. After clearing the jam, reinstall the drum and toner assembly securely. Finally, close the front cover, reconnect the power cord, and turn the printer back on.