Below you can download dwa 1311 driver for Windows.
File name: dwa1311.exe
Version: 1.201
File size: 44232 MB
Upload source: original install disk
Antivirus software passed: Norton ver 2.32
Dwa 1311 Driver Download(click above to download)
Forum post:
Device Specification:
Model: DWA 1311
Type: Wireless USB Adapter
Compatibility: Windows XP/Vista/7/8/10, Mac OS X 10.4 or later
Wireless Standards: IEEE 802.11n, 802.11g, 802.11b
Wireless Frequency Range: 2.4 GHz - 2.4835 GHz
Data Rate: Up to 300 Mbps
Security: WEP 64/128-bit, WPA, WPA2, WPS, WPS 2.0
Interface: USB 2.0
Antenna: External antenna with 1.8 m cable
Dimensions: 67 x 21 x 8.5 mm
Weight: 7 grams
Troubleshooting Questions and Answers:
Q1: The DWA 1311 is not connecting to my wireless network. What could be the issue?
A1: There could be several reasons for this issue. Please make sure that the device is properly inserted into the USB port and all drivers are correctly installed. Ensure that you have entered the correct network passphrase and that your wireless router is compatible with IEEE 802.11 standards. Also, try restarting your computer and router, as it may resolve any temporary connectivity issues.
Q2: My DWA 1311 keeps disconnecting abruptly. How can I fix this problem?
A2: Frequent disconnections can be caused by various factors. Firstly, check if the adapter is connected to a USB 2.0 port, as insufficient power supply from USB 1.x may result in intermittent disconnections. Additionally, ensure that your computer's power management settings are not set to turn off USB devices to save power. Interference from other electronic devices or walls can also impact the signal strength. If possible, try relocating your router or adapter to minimize potential obstructions.
Q3: I've installed the latest drivers for my DWA 1311, but the device still isn't recognized by my computer. What should I do?
A3: If the device is not recognized after installing the drivers, try the following steps:
- Make sure that the USB port is working with other devices. If not, try connecting the adapter to a different USB port.
- Check if the drivers were installed correctly. Uninstall the existing driver, restart your computer, and reinstall the driver from the official website.
- Ensure that you have downloaded the correct