Below you can download zebra gk420d windows 8 driver for Windows.
File name: zebra-gk420d_win8.exe
Version: 3.101
File size: 44236 MB
Upload source: manufactuter website
Antivirus software passed: AVG version 1.51
Zebra Gk420D Driver Download Windows 8(click above to download)
Device Specification:
- Model: Zebra GK420D
- Driver Compatibility: Windows 8
- Type: Label printer
- Connection: USB, serial, parallel
- Print Method: Direct thermal
- Maximum Print Resolution: 203 dpi (8 dots/mm)
- Maximum Print Speed: 5 inches (127 mm) per second
- Maximum Label Width: 4.25 inches (108 mm)
- Maximum Label Length: 39 inches (990 mm)
- Memory: 8 MB Flash, 8 MB SDRAM
- Power Source: External power supply
- Dimensions: 7.6 inches (194 mm) (H) x 7.5 inches (191 mm) (W) x 10 inches (254 mm) (D)
- Weight: 3.1 lbs (1.4 kg)
Troubleshooting Questions and Answers:
1. Q: Why is the Zebra GK420D not printing any labels?
A: There could be several reasons for this issue. First, ensure that the printer is powered on and connected properly to the computer. Check if the printer driver is correctly installed. Also, verify that the roll of labels is loaded correctly in the printer and has not run out.
2. Q: The labels printed by the Zebra GK420D have streaks or smudges. What can I do to fix this?
A: If the labels have streaks or smudges, it is likely that the printhead is dirty. To resolve this, turn off the printer and carefully clean the printhead using a lint-free cloth and isopropyl alcohol. Be gentle and ensure not to damage the printhead. Once cleaned, try printing again to check if the issue is resolved.
3. Q: The Zebra GK420D is displaying a "Paper Out" error even though there is paper loaded. How can I resolve this error?
A: If the printer shows a "Paper Out" error even when there is paper loaded, it could be due to incorrect paper calibration. To fix this, go to the printer's control panel or settings and access the menu for paper calibration. Follow the instructions provided to calibrate the paper correctly. After calibration, restart the printer and check if the error is resolved.