Below you can download ricoh sp 112 ddst driver for Windows.
File name: ricoh-sp112-ddst.exe
Version: 9.335
File size: 44507 MB
Upload source: other website
Antivirus software passed: Kaspersky ver. 3.61
Download Driver Ricoh Sp 112 Ddst(click above to download)
Specifications:
- Device: Ricoh SP 112 DDST Printer
- Type: Monochrome Laser Printer
- Technology: Laser beam scanning, electrophotographic printing
- Print Speed: Up to 16 pages per minute
- Print Resolution: 1200 x 600 dpi
- Paper Capacity: 50 sheets
- Media Sizes: A4, A5, A6, B5
- Connectivity: USB 2.0
- Supported Operating Systems: Windows, Mac OS, Linux
- Dimensions: 402 x 368.5 x 119 mm
- Weight: 6.7 kg
Troubleshooting Questions and Answers:
1. Q: Why is my Ricoh SP 112 DDST printer not printing?
A: If your printer is not printing, please check the following:
- Ensure that the printer is powered on and connected to the computer properly.
- Verify that the printer has enough paper and toner/ink to complete the print job.
- Check for any error messages on the printer's display panel and consult the user manual or manufacturer's website for further troubleshooting steps.
2. Q: How can I resolve paper jams in my Ricoh SP 112 DDST printer?
A: To resolve paper jams in your printer, please follow these steps:
- Turn off the printer and unplug it from the power source.
- Open the printer's paper tray and carefully remove any jammed paper.
- Check for any torn pieces of paper or debris inside the printer and remove them if found.
- Close the paper tray properly and plug the printer back in.
- Try printing a test page to ensure the issue is resolved. If not, refer to the user manual or contact Ricoh customer support for assistance.
3. Q: My Ricoh SP 112 DDST printer is printing faded or blurry documents, how can I fix this?
A: If your printer is producing faded or blurry prints, you can try the following troubleshooting steps:
- Check the toner/ink levels and replace them if they are low.
- Ensure that you are using the correct paper type and size for your print job.
- Clean the printer's print head or laser lens using a lint-free cloth to remove any dust or debris.
- Adjust the print quality settings in your computer's print settings or printer driver.
- If the issue persists, consult the user manual or contact Ric