Below you can download ch341a programmer driver for Windows.
File name: ch341a-programmer.exe
Version: 4.945
File size: 19054 MB
Upload source: manufactuter website
Antivirus software passed: Kaspersky v. 5.72
Download Driver Ch341A Programmer(click above to download)
Device Specification:
- Device type: CH341A Programmer
- Supported OS: Windows XP, 7, 8, and 10
- Programming Chip: Supported
- USB Interface: USB 2.0
- Voltage Requirement: 5V
- Power Consumption: 350mA
- Supported IC Types: EEPROM, SPI FLASH 3.3V/5V
- Dimensions: 60mm x 30mm x 25mm
- Weight: 15g
Troubleshooting Questions and Answers:
Q1. Why is my CH341A Programmer not being recognized by my computer?
A1. Firstly, ensure that you have installed the correct driver for the device. If the driver is installed correctly, try using a different USB port or cable to connect the programmer to your computer. If the issue persists, the device or the USB port on your computer may be faulty.
Q2. Can I use the CH341A Programmer with Mac or Linux operating systems?
A2. No, the CH341A Programmer is only compatible with Windows XP, 7, 8, and 10. There are no official drivers available for Mac or Linux.
Q3. What should I do if the programming process fails or produces errors?
A3. If you encounter programming failures or errors, make sure that the chip you are attempting to program is supported by the CH341A Programmer. Check if the chip is connected properly to the programmer and ensure that you have selected the correct programming mode. If the problem persists, try using a different chip or restarting the programming process.
Note: Remember to exercise caution when using the CH341A Programmer, as incorrect programming or misuse may lead to permanent damage to chips.