Below you can download zebra zm400 for windows 10 driver for Windows.
File name: zebra-zm400-for_win10.exe
Version: 1.100
File size: 27030 MB
Upload source: manufactuter website
Antivirus software passed: F-Secure ver 4.63
Zebra Zm400 Driver For Windows 10(click above to download)
Device Specification: Zebra ZM400
- Printer Type: Thermal Transfer
- Maximum Print Speed: 10 inches per second
- Maximum Print Resolution: 203 dpi
- Maximum Print Width: 4.09 inches
- Connectivity: USB, Serial, Parallel, Ethernet
- Memory: 8 MB Flash, 16 MB SDRAM
- Media Types: Continuous Labels, Continuous Receipts, Fanfold Paper, Tag Stock
- Media Handling: Media Sensor, Reflective Sensor, Transmissive Sensor, Full Roll Rewind
- Supported Operating Systems: Windows 10, Windows 8, Windows 7, Windows Server 2019, Windows Server 2016, Windows Server 2012
Troubleshooting Questions and Answers:
Q1: Why is my Zebra ZM400 not printing?
A1: There could be multiple reasons. Make sure the printer is powered on and connected properly to the computer. Check if the printer driver is correctly installed. Also, ensure that there is sufficient ribbon and label stock loaded and that the printhead is clean. Try running a test print or self-test to further diagnose the issue.
Q2: The ZM400 printer is showing a "Paper Out" error. What should I do?
A2: Firstly, verify if there is enough label stock loaded in the printer and that it is properly aligned. Ensure that the media sensors are properly calibrated for the label type being used. If the issue persists, try power cycling the printer by turning it off and disconnecting the power for a few minutes before restarting. If the problem continues, consult the printer's user manual or contact technical support.
Q3: My Zebra ZM400 is experiencing connectivity issues. How can I resolve this?
A3: If you are using a network connection, ensure that the Ethernet cable is securely connected and the network settings on the printer are correctly configured. If the printer is connected via USB, try using a different USB port or cable to rule out any issues with the connection. Restart the printer and computer to refresh the connection. If the problem still persists, consult the printer's documentation or contact Zebra's support for further assistance.