Below you can download dwa-131 wireless n nano usb adapter driver for Windows.
File name: dwa-131-wireless-n-nano-usb-adapter.exe
Version: 8.707
File size: 14.42 MB
Upload source: original install disk
Antivirus software passed: McAfee 1.36
Download Driver Dwa-131 Wireless N Nano Usb Adapter(click above to download)
Specifications of Dwa-131 Wireless N Nano USB Adapter:
- Model: Dwa-131
- Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
- Interface: USB 2.0
- Frequency Range: 2.4 GHz
- Wireless Data Rates: Up to 300 Mbps
- Security: WPA/WPA2 (Wi-Fi Protected Access)
- Compatibility: Windows XP/Vista/7/8/10, Mac OS X 10.4 or later
Troubleshooting Questions and Answers:
Q1: Why is my Dwa-131 adapter not connecting to any available networks?
A1: Ensure that the adapter is properly inserted into the USB port. Make sure the correct driver is installed, and check if the Wi-Fi network is within range. Restarting your device or reinstalling the driver may also help resolve the issue.
Q2: Why is the connection speed of my Dwa-131 adapter much slower than expected?
A2: Verify that the adapter is connected to a USB 2.0 port, as using a USB 1.1 port may reduce the speed. Check for potential interference from other wireless devices or physical obstacles blocking the signal. Updating the driver and adjusting the channel settings on your router might improve the connection speed as well.
Q3: Why does my Dwa-131 adapter intermittently disconnect from the network?
A3: Ensure that the USB port is providing sufficient power to the adapter by connecting it directly to the computer instead of using a USB hub. Check for any conflicting software or driver issues on your system by performing a clean boot. Adjusting the power management settings of the adapter and updating its firmware may also help resolve the disconnection issue.