Below you can download kyocera taskalfa 1800 driver for Windows.
File name: kyocera-taskalfa1800.exe
Version: 1.351
File size: 44228 MB
Upload source: other website
Antivirus software passed: Symantec version 2.37
Download Driver Kyocera Taskalfa 1800(click above to download)
Forum Post:
Device Specification:
Brand: Kyocera
Model: Taskalfa 1800
Type: Multifunctional Printer
Functions: Print, Copy, Scan
Print Speed: Up to 18 pages per minute (A4)
Resolution: 600 x 600 dpi
Maximum Paper Size: A3
Duplex Printing: Manual
Scanner Type: Flatbed
Scan Resolution: Up to 600 x 600 dpi
Maximum Scan Size: A3
Connectivity: USB 2.0
Supported Operating Systems: Windows, Mac, Linux
Dimensions (W x D x H): 565 mm x 527 mm x 485 mm
Weight: 26 kg
Troubleshooting Questions and Answers:
1. Q: Why is my Kyocera Taskalfa 1800 not printing?
A: Please ensure that the printer is powered on and connected to your computer through a USB 2.0 cable. Also, check if you have any pending print jobs in the print queue. If there are no print jobs stuck, try restarting both the printer and the computer.
2. Q: I am unable to scan documents with my Kyocera Taskalfa 1800, what could be the issue?
A: Firstly, ensure that the scanner is connected to your computer properly via USB. Check if the required driver software is installed on your computer. If not, download and install the Kyocera Taskalfa 1800 driver from the official Kyocera website. In case the issue persists, try restarting both the scanner and the computer.
3. Q: How can I enable duplex printing on my Kyocera Taskalfa 1800?
A: The Kyocera Taskalfa 1800 does not have automatic duplex printing capabilities. To enable duplex printing, manually print one side of the document, then reinsert the printed pages and print the other side. Please make sure to follow the proper manual duplexing instructions provided with the printer.
Note: The information provided above is based on the specifications available at the time of writing this post and may be subject to change.