Below you can download windows 10 for zebra lp 2844 driver for Windows.
File name: _win10-for-zebra-lp2844.exe
Version: 6.130
File size: 20607 MB
Upload source: manufactuter website
Antivirus software passed: Kaspersky v. 4.83
Windows 10 Driver For Zebra Lp 2844(click above to download)
Specifications:
- Device: Zebra LP 2844
- Operating System: Windows 10
- Driver Compatibility: Windows 10 compatible driver available
- Connectivity: USB port
- Print Technology: Direct Thermal
- Print Speed: Up to 4 inches per second
- Print Resolution: 203 dpi (dots per inch)
- Maximum Print Width: 4.09 inches
- Maximum Label Length: 39 inches
- Memory: Standard 8 MB Flash, 8 MB SDRAM
- Media Sensors: Transmissive and reflective
- Compatibility: Works with various label types and sizes
- Dimensions: 7.6 x 7.5 x 10.0 inches (H x W x D)
- Weight: 3.7 lbs
Troubleshooting:
Q1: Why is my Zebra LP 2844 not printing anything?
A1: Firstly, ensure that the printer is properly connected to the computer via the USB port. Check if the driver is installed correctly by going to "Device Manager" and checking for any warning symbols or error messages. If needed, reinstall the Windows 10 compatible driver. Additionally, make sure the labels are loaded correctly and check the label settings in the print application.
Q2: My Zebra LP 2844 is printing faded labels, what should I do?
A2: First, verify if the print speed and darkness settings are appropriate for your labels. Adjust these settings accordingly in the printer driver or label software. Additionally, check if the printhead is clean and free from any debris. Use a clean, lint-free cloth and isopropyl alcohol to gently wipe the printhead. If the issue persists, the printhead may need replacement.
Q3: How can I resolve paper jams in my Zebra LP 2844?
A3: To clear a paper jam, turn off the printer and remove any stuck labels or torn pieces of paper from the media path. Open the printhead and check for any obstructions or debris, ensuring it moves freely. Clean the rollers with a lint-free cloth and isopropyl alcohol. Afterward, reload the label roll, close the printhead properly, and turn on the printer. Adjust the label position and tension if needed.