Below you can download kyocera ecosys p2040dn driver for Windows.
File name: kyocera-ecosys-p2040dn.exe
Version: 1.830
File size: 30286 MB
Upload source: original install disk
Antivirus software passed: Avira v. 1.85
Download Driver Kyocera Ecosys P2040Dn(click above to download)
Device Specification:
- Model: Kyocera Ecosys P2040Dn
- Type: Laser printer
- Print technology: Monochrome laser
- Print speed: Up to 42 pages per minute
- Print resolution: 1200 x 1200 dpi
- Duplex printing: Yes
- Paper capacity: 350 sheets (maximum 850 sheets)
- Interface: USB 2.0, Ethernet
- Operating systems: Windows, Mac, Linux
- Dimensions (W x D x H): 375 mm x 393 mm x 262 mm
- Weight: 14.5 kg
Troubleshooting Questions and Answers:
1. Q: Why is my Kyocera Ecosys P2040Dn not printing?
A: There could be several possible reasons for this issue:
- Check if the printer is powered on and properly connected to the computer.
- Ensure that there is paper loaded in the tray and that it is not jammed.
- Verify if the printer driver is correctly installed and up-to-date.
2. Q: How do I resolve paper feed problems with my Kyocera Ecosys P2040Dn?
A: If you are experiencing paper feed problems, consider the following:
- Make sure the paper is loaded correctly and not exceeding the maximum capacity.
- Check if the paper guides are properly aligned and holding the paper in place.
- Clean the feed rollers using a lint-free cloth and ensure they are not worn out.
3. Q: What should I do if my Kyocera Ecosys P2040Dn is producing poor print quality?
A: If your prints are of insufficient quality, follow these steps:
- Check if the toner cartridge is properly installed and has sufficient toner.
- Clean the printer's interior using a soft cloth to remove any accumulated dust.
- Adjust the print density settings or perform a calibration if necessary.