Download Drivers

Hi everyone,
I'm currently facing an issue with finding the driver for the HL USB-RS232 on Windows 10. I've been searching extensively on various websites and forums, including the manufacturer's official website, but so far I haven't had any luck. I tried downloading and installing a few drivers that seemed similar, but none of them worked properly. Could someone please provide me with a direct link to the recommended driver for this device that is compatible with Windows 10? Any assistance would be greatly appreciated. Thank you!

Below you can download hl usb-rs232 windows 10 driver for Windows.

File name: hl-usb-rs232-win10.exe
Version: 5.396
File size: 19876 MB
Upload source: original install disk
Antivirus software passed: Eset v 4.64

Hl Usb-Rs232 Driver Windows 10

(click above to download)


Device Specification:
- Model: HL USB-RS232
- Compatible with: Windows 10
- Interface: USB
- Connector: RS232
- Driver: USB-RS232 Driver

Troubleshooting Questions and Answers:
Q1. Why is my HL USB-RS232 not recognized by my Windows 10 computer?
A1. Ensure that the USB-RS232 driver is properly installed in your Windows 10 system. Check if the device is connected securely and try connecting it to a different USB port. Restarting the computer may also help resolve recognition issues.

Q2. What should I do if my HL USB-RS232 connection is unstable or frequently disconnects?
A2. Firstly, verify that the USB and RS232 connectors are securely connected to their respective ports. Ensure that the USB cable is not damaged or frayed. Try using a different USB cable or an alternate RS232 connector. In some cases, updating the USB-RS232 driver to the latest version might help stabilize the connection.

Q3. My HL USB-RS232 is not transmitting data to the connected device, what could be the issue?
A3. Check if the device you are trying to communicate with is turned on and compatible with RS232 protocol. Verify that the cables are connected correctly, and try a different RS232 cable if possible. Ensure that the data transmission settings (baud rate, parity, flow control, etc.) of both the device and the HL USB-RS232 are properly configured to match each other's requirements.

Thank you so much for sharing this link! I've been desperately searching for a working Windows 10 driver for my HL USB-RS232 device.