Below you can download wob instantdrive controller driver for Windows.
File name: wob-instantdrive-controller.exe
Version: 3.180
File size: 17.29 MB
Upload source: peer 2 peer
Antivirus software passed: Symantec 3.82
Wob Instantdrive Controller(click above to download)
• Model: Wob Instantdrive Controller
• Input: AC 100-240V, 50/60Hz
• Output: DC 12V, 2A
• Dimensions: 10cm x 6cm x 2cm
• Weight: 150g
• Connectors: USB, Ethernet
• Compatibility: Windows, macOS, Linux
• Supported Protocols: Wob Protocol v2.0, TCP/IP, UDP
• Power Consumption: <10W
• Built-in Safety Features: Overload protection, short circuit protection, temperature control
Troubleshooting Questions:
1. Why is my device not turning on after connecting the Wob Instantdrive Controller?
- Ensure that the AC power supply is properly connected to the controller.
- Check if the power adapter is securely plugged into a functioning power outlet.
- Verify that the power outlet is providing the correct voltage range (100-240V).
2. Why is my Wob Instantdrive Controller not recognized by my computer?
- Check if the USB/Ethernet cable is securely connected to both the controller and the computer.
- Ensure that the drivers for the controller are properly installed on your operating system.
- Try connecting the controller to a different USB/Ethernet port on your computer to rule out any issues with the current port.
3. Why is the Wob Instantdrive Controller not responding to my commands?
- Make sure the controller is powering on by checking for any indication lights or LED indicators.
- Verify that the connected device or software is compatible with the Wob Protocol v2.0 or the appropriate protocols.
- If using Ethernet, ensure that the network connection is stable and the IP settings are correctly configured.
NOTE: The above responses are based on the assumption that the troubleshooting process is conducted by a knowledgeable person.