Below you can download sharp mx-5112n driver for Windows.
File name: sharp-mx-5112n.exe
Version: 1.291
File size: 44896 MB
Upload source: original install disk
Antivirus software passed: Avira ver. 4.55
Sharp Mx-5112N Driver(click above to download)
Monitor
Screen Size: 23.8 inches
Resolution: Full HD (1920 x 1080 pixels)
Aspect Ratio: 16:9
Panel Type: IPS
Refresh Rate: 60Hz
Brightness: 250 cd/m²
Contrast Ratio: 1000:1
Response Time: 4ms
Viewing Angle: 178° horizontal, 178° vertical
Connectivity
Video Inputs: HDMI, VGA
Audio Output: 3.5mm headphone jack
USB Ports: 2 x USB 3.0
Dimensions and Weight
Dimensions (W x H x D): 54.2 cm x 41.0 cm x 21.5 cm
Weight: 3.2 kg
Troubleshooting Questions and Answers:
Q1: Why is the monitor not turning on?
A1: Ensure that the power cable is securely connected to an active power outlet. Check if the power light on the monitor is illuminated. Try pressing the power button on the monitor to make sure it is not in standby mode. If the issue persists, consider checking the power supply or contacting technical support.
Q2: Why is the screen display blurry or distorted?
A2: Verify the resolution settings of the connected device and ensure it matches the monitor's native resolution (1920 x 1080). Check if there are any loose or damaged video cables. Adjust the sharpness settings on the monitor's OSD (On-Screen Display) if necessary. If the problem persists, try connecting the monitor to another device to isolate the issue.
Q3: Why is there no audio coming from the monitor's built-in speakers?
A3: Confirm that the audio cable is properly connected between the audio source and the monitor. Adjust the volume level using the monitor's OSD and ensure it is not muted. Check the sound settings on the connected device and make sure the audio is not directed to an external device. If the issue continues, test the speakers with another audio source or consider contacting technical support for further assistance.