Below you can download pciven_10ec&dev_c821&subsys_831a103c&rev_00 driver for Windows.
File name: pci-ven_10ec-dev_c821-subsys_831a103c-rev_00.exe
Version: 8.330
File size: 19664 MB
Upload source: manufactuter website
Antivirus software passed: Avira v 3.77
PciVen_10Ec&Dev_C821&Subsys_831A103C&Rev_00(click above to download)
Device Specification:
Device ID: PciVen_10Ec&Dev_C821&Subsys_831A103C&Rev_00
Device Type: PCI Device
Vendor ID: 10Ec
Device ID: C821
Subsystem ID: 831A103C
Revision: 00
Troubleshooting Questions and Answers:
Q1: My device is not being recognized by my computer. What should I do?
A1: If your device is not being recognized, try the following steps:
1. Ensure that the device is properly connected to the PCI slot on your computer.
2. Check if the device drivers are installed correctly. If not, download and install the latest drivers from the vendor's website.
3. Restart your computer and check if the device is detected.
Q2: I'm experiencing frequent disconnections with my device. How can I troubleshoot this issue?
A2: To troubleshoot frequent disconnections, consider the following troubleshooting steps:
1. Ensure the device's connection is secure and not loose or damaged.
2. Check for any firmware or driver updates for the device. Install the updates if available.
3. If using a wired connection, try using a different cable or port. If using wireless, ensure the signal strength is adequate or try moving closer to the router.
Q3: My device is not functioning as expected. What can I do to resolve this issue?
A3: If your device is not functioning properly, try these troubleshooting tips:
1. Disconnect and reconnect the device to ensure a proper connection.
2. Verify if the device is compatible with your operating system. Check for any specific system requirements and ensure they are met.
3. If the issue persists, uninstall the device drivers, restart your computer, and then reinstall the drivers from the vendor's website.