Below you can download chelsio t420-cr 10g bus enumerator driver for Windows.
File name: chelsio-t420-cr-10g-bus-enumerator.exe
Version: 6.248
File size: 23012 MB
Upload source: original install disk
Antivirus software passed: F-Secure v. 3.24
Chelsio T420-Cr 10G Bus Enumerator Drivers(click above to download)
Specification of Chelsio T420-Cr 10G Bus Enumerator Drivers:
- Device Type: Network Adapter
- Model: Chelsio T420-Cr
- Interface: PCIe 3.0 x8
- Data Transfer Rate: 10 Gigabit Ethernet (10Gbps)
- Form Factor: Low-profile
- Supported Network Protocols: TCP/IP, UDP/IP, ICMP/IP, IGMP/IP
- Supported Operating Systems: Windows, Linux, FreeBSD, Solaris
- Compatibility: RoHS Compliant
- Driver Support: Chelsio Unified Wire Driver Version 1.4.11 or later
Troubleshooting Questions and Answers:
Q1: Why is the Chelsio T420-Cr adapter not being recognized by my operating system?
A1: Ensure that the latest Chelsio Unified Wire Driver (version 1.4.11 or later) is installed for your specific operating system. Additionally, ensure the device is properly seated in the PCIe slot and that the slot is activated/enabled in the motherboard BIOS.
Q2: What can I do if the Chelsio T420-Cr adapter is experiencing intermittent connectivity issues?
A2: Try reseating the adapter in the PCIe slot to ensure a secure connection. Check the network cable for any potential damage or loose connections. Verify that the correct firmware version is installed and consider updating it if necessary. You may also try disabling and re-enabling the adapter in the operating system's network settings.
Q3: How can I optimize the performance of my Chelsio T420-Cr adapter?
A3: Ensure that the network drivers on your operating system are up to date. If possible, use driver version 1.4.11 or later provided by Chelsio. Adjust the adapter settings, such as enabling hardware offloading features and optimizing TCP/IP settings, according to the Chelsio documentation. If using this adapter for storage purposes, make sure that your storage systems and drivers are properly configured to take advantage of the adapter's capabilities.
Please note that the provided troubleshooting questions and answers are based on common scenarios and could vary depending on specific issues faced by the user.