Below you can download lsi 1078 romb driver for Windows.
File name: lsi-1078-romb.exe
Version: 1.600
File size: 43221 MB
Upload source: manufactuter website
Antivirus software passed: Norton version 3.75
Lsi 1078 Romb(click above to download)
The Lsi 1078 Romb is a RAID controller used primarily in servers and storage systems. It allows for efficient management of multiple hard drives and ensures data redundancy and high performance. This device offers various features and specifications to enhance the overall functionality of a server system.
Specifications:
- RAID Level Support: RAID 0, RAID 1, RAID 10, RAID 5, RAID 50, RAID 6, RAID 60
- Interface Type: PCIe x8
- Data Transfer Rate: Up to 6Gb/s
- SAS/SATA Compatibility: SAS 3.0 and SATA 3.0
- Cache Memory: 512MB or 1GB DDR2
- Number of Supported Drives: Up to 8 SAS or SATA drives
- Operating System Compatibility: Windows, Linux, VMware, and more
- Management Software: WebBIOS, MegaRAID Storage Manager, and Command Line Interface (CLI)
Troubleshooting Questions and Answers:
Q1: Why is my RAID controller not recognizing all connected drives?
A1: There could be several reasons for this issue. Please check the following:
- Ensure proper connection between the RAID controller and the drives.
- Verify that the drives are compatible and have been installed correctly.
- Update the firmware of the RAID controller to ensure compatibility and support for all connected drives.
Q2: My server system is showing degraded performance with the Lsi 1078 Romb. How can I improve it?
A2: To improve performance, please consider the following steps:
- Make sure the firmware of the RAID controller is up to date.
- Optimize the configuration of the RAID (such as stripe size and cache settings) based on your workload.
- Consider adding more cache memory or upgrading to a higher-capacity RAID controller if necessary.
- Ensure proper ventilation and cooling in the server system to prevent overheating.
Q3: I'm experiencing intermittent data corruption issues with my RAID setup. What could be the cause?
A3: Data corruption can stem from various sources. Please check the following aspects:
- Verify the integrity of your RAID drives with diagnostic tools and perform an error scan.
- Ensure all connected cables are in good condition and securely connected.
- Check for any firmware updates for the Lsi 1078 Romb and apply them, as they could address known issues related to data corruption.
- If the problem persists, consider contacting technical support