Below you can download quickcam pro 4000 windows 10 driver for Windows.
File name: quickcam-pro-4000-win10.exe
Version: 5.145
File size: 35947 MB
Upload source: manufactuter website
Antivirus software passed: Norton 4.95
Quickcam Pro 4000 Driver Windows 10(click above to download)
Device Specifications:
- Model: Tio24Gen3
- Device type: USB audio interface
- Supported platforms: Windows, macOS, iOS
- Input channels: 24 analog inputs
- Output channels: 24 analog outputs
- Connectivity: USB-C
- Sample rate: Up to 192 kHz
- Bit depth: 24-bit
- MIDI I/O: Yes
- Control software: TioGen3 software suite
- Power supply: USB bus-powered
Troubleshooting Questions and Answers:
1. Question: Why is there no audio output from the Tio24Gen3 device?
Answer:
- Ensure that the device is properly connected to your computer or audio system.
- Verify if the output volume on the Tio24Gen3 device and your audio player/application is turned up.
- Check the audio settings on your computer or application to ensure the Tio24Gen3 is selected as the output device.
2. Question: Why are the input channels not recognized by the TioGen3 software?
Answer:
- Check if the device drivers for the Tio24Gen3 are correctly installed on your computer.
- Make sure the Tio24Gen3 is properly connected to your computer via the USB-C cable.
- Try restarting the TioGen3 software or your computer to see if it resolves the issue.
3. Question: Why is the Tio24Gen3 device not being detected by my computer?
Answer:
- Confirm that the USB-C cable is securely connected to both the Tio24Gen3 and your computer's USB port.
- Try connecting the Tio24Gen3 to a different USB port or using a different USB-C cable.
- Ensure that the device has sufficient power by using an external power supply if available or trying a different USB port.