Below you can download hp laserjet pro m12w.exe driver for Windows.
File name: hp-laserjet-pro-m12wexe.exe
Version: 5.505
File size: 30103 MB
Upload source: other website
Antivirus software passed: Symantec ver 3.58
Hp Laserjet Pro M12W.Exe(click above to download)
Specifications:
- Brand: HP
- Model: Laserjet Pro M12W
- Connectivity: USB 2.0, Wireless
- Print Speed: Up to 19 ppm (black)
- Print Resolution: Up to 600 x 600 dpi (black)
- Paper Sizes: A4, A5, A6, B5, envelopes, custom sizes (76 x 127 to 216 x 356 mm)
- Paper Capacity: Up to 150 sheets
- Duty Cycle (monthly): Up to 5,000 pages
- Mobile Printing Capability: Apple AirPrint, HP ePrint, Mopria-certified
- Operating Systems Supported: Windows, Mac, Linux
- Dimensions: 349 x 238 x 196 mm
- Weight: 5.2 kg
Troubleshooting Questions and Answers:
1. Q: Why is my HP Laserjet Pro M12W not printing?
A: There could be multiple reasons for this issue. Make sure the printer is powered on and connected to the computer via USB or wireless. Check if there are any error messages on the printer's display. Verify that there is enough paper and ink/toner in the printer. Restart both the printer and the computer, and try printing a test page.
2. Q: How do I resolve paper jams in my HP Laserjet Pro M12W?
A: Paper jams can occur due to various reasons. Firstly, turn off the printer and unplug it from the power source. Remove any loose paper from the input and output trays. Gently pull out any stuck paper from inside the printer. Make sure the paper is aligned properly in the trays without overloading them. Once done, plug in and restart the printer, and try printing again.
3. Q: Why does my HP Laserjet Pro M12W produce blurry or smeared prints?
A: Blurry or smeared prints can be caused by several factors. Start by checking the print settings and ensure the correct paper type and quality are selected. Check the toner/ink levels and replace them if necessary. Clean the printer's internal components, such as the drum and rollers, to remove any dust or debris. If the issue persists, try calibrating the printer or adjusting the print density settings.