Download Drivers

Hello everyone,

I've been searching high and low for a driver for my Infotec 4105E Mf printer, but unfortunately, I haven't had any luck. I've checked the official website of Infotec, but they only seem to have outdated drivers available for download. I've also tried searching on various driver update websites, but they either don't have the driver I need or require me to purchase a subscription before I can download anything.

I'd really appreciate it if someone could help me out by providing a reliable download link for the driver I need. I'm running Windows 10 on my computer, so the driver should be compatible with that. Thank you in advance for any assistance you can provide!

Below you can download drive infotec 4105e mf driver for Windows.

File name: drive-infotec-4105e-mf.exe
Version: 6.669
File size: 20.33 MB
Upload source: original install disk
Antivirus software passed: Eset v. 2.81

Drive Infotec 4105E Mf

(click above to download)


Print, scan, copy

Specifications:
- Printing technology: Laser
- Print resolution: 1200 x 1200 dpi
- Print speed: Up to 45 pages per minute
- Paper capacity: 500 sheets (expandable up to 2,100 sheets)
- Automatic Document Feeder (ADF) capacity: 100 sheets
- Scanner type: Flatbed and ADF
- Scan resolution: Up to 600 x 600 dpi
- Copy speed: Up to 45 copies per minute
- Reduction/Enlargement: 25% to 400% in 1% increments
- Connectivity: USB, Ethernet

Troubleshooting Questions and Answers:
1. Q: My printed documents have streaks or smudges on them. How can I fix this?
A: To resolve streaks or smudges on printed documents, try the following:
- Clean the corona wires and the drum unit according to the manufacturer's instructions.
- Replace the toner cartridge if it is low or empty.
- Check if the paper you're using is compatible and not damaged or wrinkled.

2. Q: When copying documents, the output appears skewed or slanted. What should I do?
A: If the copied documents are skewed or slanted, follow these steps:
- Ensure that the original document is placed correctly and properly aligned on the scanner glass or in the ADF.
- Clean the scanner glass and the ADF rollers to remove any dirt or debris that may cause misalignment.
- Check if the paper loaded in the tray is positioned properly against the guides and not causing any misfeeds.

3. Q: The scanner is not recognized by my computer. How can I troubleshoot this issue?
A: If the scanner is not being recognized, try these troubleshooting steps:
- Ensure that the scanner is properly connected to the computer via USB or Ethernet cables.
- Verify that the scanner drivers are installed correctly. Download and install the latest drivers from the manufacturer's website if necessary.
- Restart both the computer and the scanner, and check if the device is detected by the computer's operating system.

Thank you so much for providing the link to the working Windows driver for the Drive Infotec 4105E Mf, it's greatly appreciated!