Below you can download graphtec fc2100-60a driver for Windows.
File name: graphtec-fc2100-60a.exe
Version: 8.517
File size: 44567 MB
Upload source: search engine
Antivirus software passed: F-Secure version 3.96
Graphtec Fc2100-60A Driver(click above to download)
The Graphtec Fc2100-60A Driver is a device used for controlling and operating the Graphtec Fc2100-60A cutting plotter. It acts as the interface between the computer and the cutting plotter, allowing for precise and accurate cutting of various materials.
Specifications:
- Model: Graphtec Fc2100-60A
- Compatibility: Windows and Mac operating systems
- Interface: USB and serial ports
- Cutting area: 602 mm x 50 m
- Cutting force: Up to 600 gf
- Cutting speed: Up to 400 mm/s
- Maximum media width: 712 mm
- Maximum media thickness: 0.25 mm
Troubleshooting Questions and Answers:
1. Why is my Graphtec Fc2100-60A not cutting accurately?
- Ensure that the blade is correctly inserted and tightened.
- Make sure the material is properly aligned and firmly secured on the cutting mat.
- Check the cutting force settings and increase it if necessary for tougher materials.
2. Why is the USB connection not working with my Graphtec Fc2100-60A?
- Verify that the USB cable is securely connected to both the cutting plotter and the computer.
- Check if the USB drivers are installed and up to date.
- Try connecting the device to a different USB port or using a different USB cable.
3. Why does my Graphtec Fc2100-60A not respond to the software commands?
- Check if the correct driver is installed and selected in the cutting software.
- Ensure that the cutting plotter is properly connected to the computer.
- Restart both the computer and the cutting plotter to reset the communication between them.