Below you can download cp2102 usb to uart bridge controller driver for Windows.
File name: cp2102-usb-to-uart-bridge-controller.exe
Version: 8.800
File size: 20.18 MB
Upload source: manufactuter website
Antivirus software passed: Avira ver. 4.31
Cp2102 Usb To Uart Bridge Controller(click above to download)
Supports full-speed USB interface
Max Baud Rate: 921600
Operating voltage: 3.3V
Operating temperature: -40°C to +85°C
Package dimensions: 5mm x 5mm QFN28
Troubleshooting Questions:
1. Q: Why is my Cp2102 USB to UART Bridge Controller not recognized by my computer?
A: Ensure that the drivers for the Cp2102 are installed correctly. You can download the latest drivers from the manufacturer's official website. Also, check if the USB cable is functioning properly and try connecting the device to a different USB port.
2. Q: Why am I experiencing communication issues with my Cp2102 device?
A: Make sure that the baud rate settings on your Cp2102 and the connected device are matching. Verify that the Tx and Rx connections are correct and securely connected. Consider checking if there are any conflicts with other devices using the UART interface.
3. Q: My Cp2102 USB to UART Bridge Controller is not powering on. What could be the issue?
A: Firstly, confirm that the device is being powered by an appropriate 3.3V power source. Ensure that the power supply connections to the VDD and VIO pins are accurate. If the issue persists, there might be a fault with your Cp2102 device, and contacting the manufacturer for further assistance or replacement might be necessary.