Below you can download cce solo a45 windows 10 driver for Windows.
File name: cce-solo-a45-win10.exe
Version: 3.350
File size: 16803 MB
Upload source: original install disk
Antivirus software passed: McAfee 1.76
Drivers Cce Solo A45 Windows 10(click above to download)
Device Specification:
- Brand: Samsung
- Model: M2070Fw
- Type: Multifunction printer
- Functions: Print, scan, copy, and fax
- Printing Technology: Laser
- Print Speed: Up to 21 pages per minute (ppm)
- Resolution: Up to 1200 x 1200 dpi
- Copy Speed: Up to 21 cpm
- Scanner Type: Flatbed and ADF (Automatic Document Feeder)
- Scanner Resolution: Up to 1200 x 1200 dpi
- Fax Transmission Speed: 33.6 Kbps
- Connectivity: USB, Ethernet, Wi-Fi
- Supported Operating Systems: Windows, Mac, Linux
- Paper Handling: 150-sheet input tray, 40-sheet ADF, 100-sheet output bin
- Duplex Printing: Manual
- Dimensions: 16.00 x 14.30 x 8.80 inches
- Weight: 19.69 lbs
Troubleshooting Questions and Answers:
1. Q: The printer is not printing properly, what could be the issue?
A: There could be several reasons for improper printing. Start by checking if the toner cartridge is correctly installed and if it has sufficient toner. Also, make sure the paper is loaded correctly and is not wrinkled or damaged. Cleaning the print head or adjusting the print settings might also help resolve the issue.
2. Q: Why is the scanner not working on my Samsung M2070Fw?
A: If the scanner is not working, ensure that the printer is properly connected to the computer via USB, Ethernet, or Wi-Fi. Confirm that the correct scanning software is installed on your computer and is up-to-date. Restarting the printer and computer might also help reset any temporary glitches and resolve the scanner issue.
3. Q: How do I resolve paper jams in the Samsung M2070Fw?
A: If you encounter a paper jam, follow these steps to clear it: Firstly, turn off the printer and disconnect the power cord. Open the printer's front cover and gently remove the jammed paper by pulling it in the direction of the paper path. Ensure that all torn pieces are removed. Close the front cover and reconnect the power cord. Turn on the printer and try printing again.
Please note that troubleshooting steps may vary, and it's always recommended to refer to the device's user manual for specific instructions.