Below you can download sannce 121ag / sannce 141cb driver for Windows.
File name: sannce-121ag-sannce-141cb.exe
Version: 3.853
File size: 17.98 MB
Upload source: other website
Antivirus software passed: G Data 4.76
Sannce 121Ag / Sannce 141Cb(click above to download)
Device Specification:
- Model: Sannce 121Ag / Sannce 141Cb
- Input: Not specified
- Output: Not specified
Troubleshooting Questions and Answers:
1. Q: Why is my device not turning on?
A: Make sure the power cable is securely connected to the device and the power outlet. Check if the power outlet is functional by plugging in another device. If the issue persists, try using a different power cable or contact the manufacturer for assistance.
2. Q: Why am I experiencing poor video quality on the device?
A: Ensure that the camera lens is clean and free from any obstructions. Check if the camera settings are adjusted correctly, including resolution and image quality. If the issue continues, verify that the video cables are securely connected. You may also try positioning the cameras in a different location or contact the manufacturer for further support.
3. Q: How can I reset my Sannce 121Ag / Sannce 141Cb to factory settings?
A: Locate the reset button on the device, typically found on the back or bottom. While the device is powered on, press and hold the reset button for about 10 seconds until the device restarts. The device will then restore to its default factory settings. If you are unsure about the reset process, refer to the device's user manual or contact the manufacturer for guidelines.