Below you can download zebra gt800 driver for Windows.
File name: zebra_gt800.exe
Version: 4.263
File size: 18.52 MB
Upload source: original install disk
Antivirus software passed: Symantec version 2.8
Driver Zebra Gt800(click above to download)
Label printer
Resolution: 203 dpi (8 dots/mm)
Print Method: Direct Thermal / Thermal Transfer
Print Speed: 5 inches/second (127 mm/second)
Maximum Print Width: 4.09 inches (104 mm)
Connectivity: USB, Serial, Ethernet
Memory: 8 MB SDRAM, 4 MB flash
Media Types: Roll or fanfold
Troubleshooting Questions and Answers:
Q1: Why is my Zebra GT800 not printing anything?
A1: Ensure that the printer is properly connected to a power source and turned on. Check if the labels or ribbon are loaded correctly. Make sure that the printer driver is installed and selected correctly in your computer's settings.
Q2: What should I do if the labels are not aligning properly?
A2: Verify if the label width and height settings in the printer driver's software match the actual label dimensions. Adjust the label guides and make sure the labels are loaded straight and properly positioned. Clean the printhead and roller to ensure smooth operation.
Q3: Why is the printed label quality poor or faded?
A3: Check if the printhead is dirty or worn out. Clean the printhead using a cleaning pen or a lint-free cloth moistened with isopropyl alcohol. Ensure that the printer is using the correct print speed and darkness settings. Replace the label roll or ribbon if they are low or empty.