Below you can download pc all in one asus v222ua driver for Windows.
File name: pc-all-in-one-asus-v222ua.exe
Version: 3.472
File size: 44630 MB
Upload source: manufactuter website
Antivirus software passed: Norton ver 4.16
Download Driver Pc All In One Asus V222Ua(click above to download)
Device Specification - Asus V222Ua All-in-One PC
- Display: 21.5-inch Full HD LED-backlit touchscreen
- Resolution: 1920 x 1080 pixels
- Processor: Intel Core i5-8250U Quad-Core
- Graphics: Intel UHD Graphics 620
- RAM: 8GB DDR4
- Storage: 1TB 5400rpm HDD + 128GB M.2 SATA SSD
- Operating System: Windows 10 Home
- Connectivity: Wi-Fi 5 (802.11ac), Bluetooth 5.0
- Ports: 1 x USB 3.1 Type-C, 2 x USB 2.0, 3 x USB 3.1 Gen 1, 1 x HDMI Out, 1 x RJ-45 LAN, 1 x 3.5mm Headphone/Microphone Combo Jack, 1 x SD Card Reader
- Webcam: 1.0MP HD
- Audio: ASUS SonicMaster technology with built-in stereo speakers
- Dimensions: 19.29 x 14.17 x 1.14 inches
- Weight: 11.4 lbs
Troubleshooting Questions and Answers:
1) Q: Why is the touch screen not responding on my Asus V222Ua All-in-One PC?
A: Firstly, ensure that the touch screen is not disabled. Go to "Settings" > "Devices" > "Touchpad" and make sure the "Enable touch screen" option is turned on. If the issue persists, try updating the touch screen driver by visiting the Asus support website and downloading the latest driver for your specific model.
2) Q: How can I improve the Wi-Fi signal strength on my Asus V222Ua?
A: To improve Wi-Fi signal strength, try moving the PC closer to the wireless router to eliminate any potential interference. Additionally, make sure there are no physical obstructions blocking the signal between the PC and the router. You can also try updating the Wi-Fi driver from the Asus support website or consider using a Wi-Fi signal booster/repeater if needed.
3) Q: My Asus V222Ua PC is displaying a black screen upon booting. What should I do?
A: Start by checking if the power cable is securely connected to the PC and ensure the power outlet is functioning properly. If the issue persists, try performing a hard reset by holding the