Below you can download epson m129h driver for Windows.
File name: epson-m129h.exe
Version: 8.859
File size: 16.16 MB
Upload source: search engine
Antivirus software passed: Panda v 4.62
Epson M129H Driver Download(click above to download)
Device Specification:
- Brand: Epson
- Model: M129H
- Type: Thermal Receipt Printer
- Connectivity: USB
- Print Technology: Thermal line printing
- Print Resolution: 203 dpi
- Print Speed: Up to 7.9 inches/second
- Interface: RS-232, USB
- Paper Width: 3.13 inches
- Paper Roll Diameter: Up to 3.27 inches
- Cutter Type: Autocutter
- Power Source: AC adapter (included)
- Dimensions: 5.51 x 7.95 x 5.82 inches (W x D x H)
- Weight: 3.75 lbs
- Compatible Operating Systems: Windows, Mac OS, Linux
Troubleshooting Questions and Answers:
Q1. Why is my Epson M129H not printing?
A1. There could be several reasons for this issue. Ensure that the printer is properly connected to the computer via USB. Also, check paper availability and make sure the paper roll is correctly installed. Additionally, check printer settings in control panel or software settings for any misconfigurations.
Q2. How do I resolve paper jam issues with my Epson M129H?
A2. If you encounter a paper jam, follow these steps:
1. Turn off the printer and disconnect the power supply.
2. Open the printer cover and gently remove any jammed paper, taking care not to tear it.
3. Make sure there are no small bits of paper remaining inside the printer.
4. Close the cover and reconnect the power supply.
5. Power on the printer and resume printing.
Q3. Why is my printed receipt fading?
A3. Faded prints can be due to various factors. To troubleshoot, consider the following:
- Check if the thermal paper roll is correctly installed. Ensure the roll is properly aligned and not loosely inserted.
- Verify paper quality. Faded prints can occur with low-quality or old thermal paper. Try using a new roll of high-quality thermal paper.
- Adjust print density in printer settings. Some models allow adjusting the print density to optimize results. Increase the density if prints are too light or faded.