Below you can download recovery huawei hg532c driver for Windows.
File name: recovery-huawei-hg532c.exe
Version: 1.952
File size: 32021 MB
Upload source: peer 2 peer
Antivirus software passed: AVG v. 2.10
Recovery Huawei Hg532C(click above to download)
Device Specifications:
- Model: Huawei HG532C
- Device Type: Wireless router
- Connectivity: Ethernet, Wi-Fi
- Network Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
- Frequency Band: 2.4 GHz
- Data Transfer Rate: Up to 300 Mbps
- Security Protocols: WEP, WPA, WPA2
- Number of Antennas: 2
- Interface: 4 x Ethernet LAN ports, 1 x Ethernet WAN port, 1 x USB 2.0 port
- Power Supply: Input: 100-240V~50-60Hz, Output: 12V DC, 1A
Troubleshooting Questions and Answers:
1. Q: Why is my Huawei HG532C router not connecting to the internet?
A: There could be several reasons for this issue. Try the following troubleshooting steps:
- Ensure the WAN cable is properly connected to the router's WAN port and the modem.
- Restart both the router and modem by unplugging their power cords, waiting for a few seconds, and then plugging them back in.
- Check if the internet service is working by connecting a device directly to the modem. If it works, the issue may be with the router's settings.
2. Q: How can I reset my Huawei HG532C router to its factory defaults?
A: To reset the router to its factory settings, follow these steps:
- Locate the reset button on the back of the router.
- Using a pin or paperclip, press and hold the reset button for about 10 seconds.
- The router lights will flash, indicating that the reset process has started.
- After a few moments, the router will reboot and restore the default settings.
3. Q: What should I do if I forgot my Huawei HG532C router's Wi-Fi password?
A: If you have forgotten the Wi-Fi password, follow these steps to retrieve or change it:
- Connect your computer to the router using an Ethernet cable.
- Open a web browser and enter the router's default IP address (usually 192.168.1.1) in the address bar.
- Enter the default username and password (usually admin for both) to access the router's admin panel.
- Navigate to the Wireless settings section and look for the Wi-Fi password