Below you can download pciven_8086&dev_1c3a&subsys_77071462&rev_04 driver for Windows.
File name: pci-ven_8086-dev_1c3a_subsys_77071462-rev_04.exe
Version: 2.814
File size: 26877 MB
Upload source: original install disk
Antivirus software passed: AVG version 5.8
PciVen_8086&Dev_1C3A&Subsys_77071462&Rev_04(click above to download)
Device Specification:
- Model: Designjet 500
- Supported Operating System: Windows 10
- Connectivity: USB, Ethernet, Parallel
- Printing Technology: Inkjet
- Print Resolution: Up to 1200 x 1200 dpi
- Print Speed: Up to 85 square feet per hour
- Maximum Media Size: 24 inches
- Media Types: Bond and coated paper, technical paper, film, photographic paper, vinyl, canvas, banners
- Memory: 16 MB
- Ink Cartridge Configuration: 4 individual cartridges (cyan, magenta, yellow, black)
- Power Consumption: 65 watts (printing), 16 watts (standby)
Troubleshooting Questions and Answers:
1. Q: Why is my Designjet 500 not printing any color?
A: Make sure the ink cartridges are properly installed and have enough ink. Try running a print head alignment or cleaning procedure from the printer settings. If the issue persists, check if the color settings in the printer driver or software are set correctly.
2. Q: Why is my Designjet 500 producing distorted prints?
A: This issue might be caused by a misaligned print head. Try aligning the print heads through the printer's control panel or software settings. Additionally, ensure that the media loaded is properly aligned and not wrinkled or damaged.
3. Q: Why is my Designjet 500 not accepting print jobs from my computer?
A: Firstly, ensure that the printer is properly connected to your computer via USB, Ethernet, or parallel cable. Check if the printer driver is correctly installed by going to the Device Manager and verifying the printer's presence. If necessary, update or reinstall the printer driver from the official manufacturer's website. Restarting both the computer and the printer might also help resolve communication issues.