Below you can download radeon 5750 hd driver for Windows.
File name: radeon-5750-hd.exe
Version: 7.950
File size: 27273 MB
Upload source: original install disk
Antivirus software passed: Norton ver. 1.12
Radeon 5750 Hd Drivers(click above to download)
Device Specification:
- Model: Manta Compressor Supreme Mm631Cs Sterowniki
- Type: Compressor
- Input: AC voltage
- Output: Compressed air
- Power: 120V
- Max Pressure: 150 psi
- Tank Capacity: 6 gallons
- Motor Power: 2 HP
- Weight: 45 lbs
- Dimensions: 18 x 18 x 19 inches
- Noise Level: 78 dB
- Additional features: Pressure regulator, pressure gauge, quick-connect couplers, thermal overload protection, oil-free pump
Troubleshooting Questions and Answers:
1. Question: Why is the compressor not building up sufficient pressure?
Answer: There could be several reasons for this issue. Start by checking if the tank drain valve is fully closed. Also, inspect the air filter for any blockage and clean or replace it if necessary. Ensure there are no air leaks in the system, especially at the fittings and connectors. If the problem persists, it may indicate a faulty pressure switch or a malfunctioning pump, requiring professional assistance.
2. Question: Why does the compressor keep tripping the thermal overload protector?
Answer: The thermal overload protector is designed to prevent overheating and protect the motor. If the compressor trips the protector frequently, it may suggest inadequate ventilation or operating in high ambient temperatures. Ensure the compressor is placed in a well-ventilated area and not covered or obstructed. Clean any dust or debris from the motor cooling fins. If the issue persists, consult a technician to inspect and repair any potential motor or electrical faults.
3. Question: Why is the compressor making excessive noise during operation?
Answer: Excessive noise can result from various factors. Firstly, check if all the bolts and screws on the compressor are securely tightened, as loose parts can cause vibrations and noise. Inspect the rubber feet or mounting pads for any damage or wear, as they help to minimize vibration transmission. If the noise remains bothersome, it might indicate worn-out or damaged internal components, such as bearings or pistons. In such cases, it's recommended to contact a professional for further diagnosis and repair.