Below you can download 298p4 display driver for Windows.
File name: 298p4-display.exe
Version: 3.988
File size: 42887 MB
Upload source: search engine
Antivirus software passed: Symantec v. 3.19
298P4 Display(click above to download)
2560x1440 resolution
28-inch display size
LED backlighting technology
178°/178° viewing angles
10-bit color depth
2ms response time
60Hz refresh rate
Ports: HDMI, DisplayPort, DVI-D, VGA, USB 3.0
Built-in speakers
4-port USB 3.0 hub
Tilt, swivel, and height-adjustable stand
Troubleshooting Questions and Answers:
1. Question: Why is my 298P4 Display not turning on?
Answer: First, ensure that the power cable is securely connected to both the display and a functioning power outlet. Also, check that the power button on the display is pressed firmly and held for a few seconds. If the issue persists, try a different power outlet or contact customer support for further assistance.
2. Question: Why is the resolution of my 298P4 Display not displaying properly?
Answer: Ensure that the appropriate resolution is selected in your computer's display settings. Additionally, check the connections between your computer and the display to ensure they are secure. If the issue persists, try using a different cable or port. Updating the display driver on your computer may also resolve the problem.
3. Question: Why is there no sound coming from my 298P4 Display's built-in speakers?
Answer: First, check your computer's volume settings and make sure it is not muted or set too low. Go into the display's settings menu and verify that the audio is enabled and the volume is turned up. If you are using an HDMI connection, ensure that the correct audio output device is selected in your computer's sound settings. If the issue persists, try connecting external speakers or headphones to the audio output of the display to check if the problem lies with the built-in speakers.