Below you can download zebra gt800 driver for Windows.
File name: zebra_gt800.exe
Version: 6.867
File size: 12206 MB
Upload source: original install disk
Antivirus software passed: Eset version 5.4
Zebra Gt800 Driver Download(click above to download)
Device Specification:
- Model: Zebra GT800
- Type: Desktop Direct Thermal/Thermal Transfer Barcode Printer
- Print Method: Direct Thermal/Thermal Transfer
- Maximum Print Speed: 5 inches per second
- Maximum Print Resolution: 203 dpi (8 dots/mm)
- Maximum Print Width: 4.09 inches (104 mm)
- Connectivity: USB, RS-232, Parallel
- Dimensions: 7.6 inches (H) x 7.6 inches (W) x 10 inches (D)
- Weight: 4.6 pounds (2.1 kg)
- Supported Operating Systems: Windows, iOS, Linux
Troubleshooting Questions:
1. Q: Why is my Zebra GT800 not printing?
A: Please check the following:
- Ensure the printer is powered on and connected to a working power source.
- Make sure the printer is properly connected to the computer using the correct interface cable.
- Check that there is a sufficient supply of media and the media sensor is properly adjusted.
- Verify that the correct printer driver is installed and selected.
2. Q: How can I resolve print quality issues with my Zebra GT800?
A: Consider the following steps:
- Make sure the print head is clean and free from any debris or residue. Clean it using a high-quality cleaning solution or a lint-free cloth.
- Check the darkness/heat settings in the printer driver and adjust if necessary.
- Ensure you are using compatible and high-quality media suitable for your printer.
- Calibrate or align the printer as per the manufacturer's instructions.
3. Q: Why is my Zebra GT800 showing a paper out error even when there is paper loaded?
A: Perform the following checks and steps:
- Ensure that the media is loaded correctly and that the media sensor is properly positioned and not blocked.
- Check for any obstructions or jams in the media path and remove them if found.
- Verify that the media type and size settings in the printer driver match the loaded media.
- Reset the printer by turning it off, disconnecting from power for a few minutes, and then reconnecting and powering it back on.