Below you can download descargar software cem dt-172 driver for Windows.
File name: descargar-software-cem-dt-172.exe
Version: 4.932
File size: 44713 MB
Upload source: manufactuter website
Antivirus software passed: Kaspersky v 4.32
Descargar Software Cem Dt-172(click above to download)
Device Specification:
- Device Name: CEM DT-172
- Manufacturer: CEM Instruments
- Type: Digital Thermometer/Data Logger
- Measurement Range: -40°C to +125°C (-40°F to 257°F)
- Accuracy: ±0.5°C (±0.9°F)
- Resolution: 0.1°C/°F
- Display: LCD with backlight
- Memory Capacity: 30,000 readings
- Logging Interval: Adjustable from 1 second to 24 hours
- Battery Type: 3V CR2032 lithium coin cell
- Interface: USB
- Software Compatibility: Windows XP/Vista/7/8/10
Troubleshooting Questions and Answers:
Q1. Why isn't the CEM DT-172 turning on?
A1. Ensure that the battery is properly inserted and not depleted. If the battery is dead, replace it with a new CR2032 lithium coin cell.
Q2. Why is the display of the CEM DT-172 not showing any readings?
A2. Check if the temperature probe is properly connected to the device. Make sure the probe is securely plugged in and fully inserted into the measurement object.
Q3. Why is the data logger not logging any readings?
A3. Verify that the memory capacity has not been reached. If the memory is full, download the data to your computer using the compatible software and clear the memory. Also, check if the logging interval is set correctly to ensure data is being recorded at the desired frequency.