Below you can download i/o hub to esi port 3400 driver for Windows.
File name: io-hub-to-esi-port-3400.exe
Version: 4.128
File size: 17107 MB
Upload source: other website
Antivirus software passed: F-Secure v 3.27
I/O Hub To Esi Port 3400(click above to download)
Line Level Output
Power Source: AC Adapter (included)
Dimensions: 6.25 x 4.5 x 1 inches
Weight: 10 ounces
Compatibility: Works with Windows, Mac, and Linux operating systems
Connectivity: USB 2.0
Sampling Rate: 48 kHz
Bit Depth: 24-bit
Signal-to-Noise Ratio: >95dB
Frequency Response: 20Hz-20kHz
Number of Channels: 2-in/2-out
Headphone Output: Yes, with dedicated volume control
MIDI Input/Output: No
Included Software: None
Troubleshooting Questions:
1. Why is the device not being recognized by my computer?
- Ensure the USB cable is properly connected to both the device and the computer.
- Try using a different USB port on the computer.
- Check if the device is compatible with your operating system and if any drivers or firmware updates are required.
2. Why is there no audio output from the device?
- Verify that the device is powered on and the AC adapter is securely plugged in.
- Check the volume levels on your computer and ensure they are not muted or set too low.
- Make sure the output device is correctly selected in your computer's sound settings.
3. Why is there static or noise in the audio playback?
- Ensure all audio cables are properly connected and not damaged.
- Try using a different USB cable or audio cables to rule out any cable issues.
- Check if any other electronic devices or power sources are causing interference and try relocating the device away from them.